Development of a new corrosion mitigation technology using nanobubbles toward corrosion mitigation in PCV system under the influence of //-rays radiolysis (Contract research); FY2021 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Tohoku University*

JAEA-Review 2022-069, 114 Pages, 2023/03

JAEA-Review-2022-069.pdf:5.91MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Development of a new corrosion mitigation technology using nanobubbles toward corrosion mitigation in PCV system under the influence of //-rays radiolysis" conducted in FY2021. In this work, in order to ensure the long-term reliability of steel structures that ensure important confinement functions in the debris removal process, such as existing PCVs and newly constructed negative pressure maintenance systems and piping, corrosion phenomena in wet environments where - and -ray emitting nuclides come into contact with steel are clarified for the first time.

Development of measuring device for inner surfaces of embedded piping (Contract research)

Ito, Hirokuni*; Hatakeyama, Mutsuo*; Tachibana, Mitsuo; Yanagihara, Satoshi

JAERI-Tech 2003-012, 34 Pages, 2003/03

JAERI-Tech-2003-012.pdf:2.87MB

The MISE was developed to evaluate low-level radiological contaminations of inner surfaces of piping. The MISE consists of a cylindrically-formed double layered type detector and a piping crawling robot, which were designed and manufactured separately. In measurements of the contaminations, an outer cylindrical detector close to the surface of piping measures -rays and -rays and an inner cylindrical detector set after a shielding plate for shield of -rays measures -rays. The -ray counting rates are derived by subtracting -ray counts measured by the inner detector from - and -ray counts measured by the outer detector. The robot transports the double layered type detector with observing inner surfaces of piping. The detection limit for the contamination of Co was found to be about 0.17Bq/cm with measurement time of 30 seconds. It is expected that 0.2Bq/cm corresponding to clearance level of Co (0.4Bq/g) can be evaluated with measurement time of 2 seconds, which is equal to measurement speed of 54m/h.

Calibration of lonization chamber survey meter and GM counter survey meter, 2; Test for measioring -ray absorbed dose rate due to skin contamination

; ;

Hoken Butsuri, 14(1), p.1 - 10, 1979/00

https://doi.org/10.5453/jhps.14.1

no abstracts in English